Verizon Support
Verizon Support

In-Home Agent Close

Try the In-Home Agent

Have it? Use it!

Need it? Get it!

Fast, easy 24/7 solutions- right on your desktop.

Customers With Disabilities
Home

FiOS Internet



Opting out of DNS Assistance by changing your DNS settings in Windows 2000 There are two procedures that you must complete in order to opt out of DNS Assistance:

  1. Find and record your current DNS server settings
  2. Statically Assign your DNS Settings
Follow the detailed steps below to complete each procedure.

Note: Setting the DNS server settings to static will opt out all computers including those connected through a wireless connection.

Find and record your current DNS server settings
  1. Click the Start button on your Windows toolbar located at the bottom of your screen.
  2. Select Run.
  3. Type CMD in the Open: field, and then click Ok.
  4. Type IPCONFIG /ALL at the command prompt.
    Note: There is a space between IPCONFIG and /ALL.
    Figure depicting the command prompt
  5. Press the Enter key on your keyboard.
    A list of all network adapters that are installed on your computer displays on the screen.
  6. Locate the adapter that you want to change, and then record the numbers located in the DNS Servers field. These numbers represent your current DNS server settings. Figure depicting the DNS Servers field
  7. Close the window.


Statically Assign your DNS Settings
  1. Click the Start button on your Windows toolbar located at the bottom of your screen.
  2. Select Settings, and then select Control Panel.
  3. Click Network and Dial-up Connections.
    A list of network connections displays on the screen.
  4. Right click on the connection that you want to change, and then select Properties.
  5. In the Components checked are used by this connection: area, select Internet Protocol TCP/IP and then click the Properties button.
  6. Select Use the following DNS server addresses.
  7. Enter the DNS server addresses you previously recorded into the Preferred DNS server and Alternate DNS server fields.
    Figure depicting the DNS server fields
  8. Replace the last octet of your DNS server with .14 in the Preferred DNS server and Alternate DNS server fields.
    For example, if your existing DNS address is 123.123.123.12, replace the .12 at the end of the address with .14. The new address for this example would be 123.123.123.14.
  9. Click Ok to save your changes.


Privacy SettingsAccept CookiesAccept Cookies
Verizon SignIn Alerts

Sign in

 

for personalized, convenient support

Did you know?

Many equipment problems can be fixed in less than
5 minutes!

Make sure your equipment is plugged in and that the power is working in the rest of your house

 

Shop FiOS

  • FiOS Internet
  • FiOS TV
  • FiOS Digital Voice
  • FiOS Deals

Account & Services

Email, News & TV

  • Check Email
  • Announcements

Support Tools