Accessing your Actiontec MI424WR router
Creating an Actiontec MI424WR wireless network in Windows XP
The Actiontec MI424WR router is incompatible with WPA2 encryption, so WPA is the preferred encryption type.
Note: The configuration screens may vary slightly depending on when you purchased your router and the version of firmware running on it.
- Open your Web browser and enter http://192.168.1.1 in the Address field. [Show Me]
- Enter your router user name and password if prompted and click Ok. [Show Me]
- If you didn't change your user name and password during setup, enter the default values of admin as the user name and password as the password.
- To improve security, your router password may have been changed to the router serial number. The serial number is included on the label affixed to the bottom or back of your router.
Click the Wireless Settings icon in the top toolbar. [Show Me]
Click Advanced Security Settings in the left navigation panel. [Show Me]
Select WPA in the Level 1 section to enable WPA network encryption.
Verizon SignIn Page
Did you know?
Many equipment problems can be fixed in less than
Make sure your equipment is plugged in and that the power is working in the rest of your house