Verizon Support
Verizon SignIn Alerts

FiOS Internet

Connecting the D-Link wireless USB adapter
Link to Step 1Link to Step 2Link to Step 3
Steps to connect additional computers to an established D-Link DI-624 wireless home network

  1. Remove the CD from the CD-ROM drive and click Exit on the Installer screen.

  2. After your computer restarts, shut it down so you can connect the USB adapter.

  3. Connect one end of the USB cable to the connector at the back of the USB adapter.

  4. Insert the other end of the cable into an available USB port in your computer.

  5. Turn the computer back on. If the "Welcome to the Found New Hardware Wizard" displays, select No, not this time.
  6. [Show Me]

  7. Select Install the software automatically (Recommended) when the "Welcome to the Found New Hardware Wizard" screen displays.
  8. [Show Me]

  9. Click Next.


Privacy SettingsAccept CookiesAccept Cookies SolutionDesc3=47421;;SolutionDesc1=15917,17442,15923
Verizon SignIn Page

Sign in


for personalized, convenient support

Did you know?

Many equipment problems can be fixed in less than
5 minutes!

Make sure your equipment is plugged in and that the power is working in the rest of your house


My Verizon

  • Add or Change Plan
  • Suspend My Service
  • Apps


Watch Fios