Verizon Support
Customers With Disabilities
Home
Verizon SignIn Alerts

FiOS Internet



Entering the USB security settings
Link to Step 1Link to Step 2Link to Step 3
Steps to connect additional computers to an established D-Link DI-624 wireless home network


  1. Click Security to enter the security settings to match the settings when you configured your router.


    • Make sure WEP is selected in the Authentication field. [Show Me]


    • Select Shared Authentication in the Authentication Mode field.
    • [Show Me]

    • Select the WEP Key number (1, 2, 3, or 4) and then select 64 bits or 128 bits to indicate the level of WEP security you chose when setting up your router.
    • [Show Me]

    • Select ASCII or HEX in the Key Format field to indicate the WEP key format you selected when configuring your router.
    • [Show Me]

    • Enter the WEP Key you used when configuring your router. Be sure to enter it in the same Key field you selected when setting up your router.

      Note: If you're unsure of the WEP encryption key you entered in your router, access your router's configuration screen and write it down.


Figure depicting the Security Screen



Next


Privacy SettingsAccept CookiesAccept Cookies SolutionDesc3=47442;;SolutionDesc2=47504;SolutionDesc1=15917,17442,15923
Verizon SignIn Page

Sign in

 

for personalized, convenient support

Did you know?

Many equipment problems can be fixed in less than
5 minutes!

Make sure your equipment is plugged in and that the power is working in the rest of your house

 

My Verizon

  • Check Email
  • Add or Change Plan
  • Suspend My Service
  • Apps

Support

Watch Fios