Verizon Support
Customers With Disabilities
Home
Verizon SignIn Alerts

FiOS Internet



Installing the USB adapter
Link to Step 1 Link to Step 2 Link to Step 3 Link to Step 4 Link to Step 5 Link to Step 6
Creating a Verizon 9100 wireless network in Windows 7


The ZyXEL wireless USB adapter is needed to send and receive the radio waves that are used to communicate over your wireless network.
  1. Remove the "cap" of the ZyXEL adapter to expose the USB connector. The cap is the portion with "ZyXEL" on it.

  2. ZyXEL G220 wireless adapter

  3. Plug the ZyXEL USB connector into an available USB port on your computer. You should see a message in the bottom right corner of your monitor informing you that new hardware has been found and that drivers are being installed. An additional message will display when the driver installation has completed.

  4. Device Driver Software Installed Successfully

    • Note: It isn't necessary to install the ZyXEL software when using Windows 7. The security settings that could be set using the ZyXEL software will be entered when you connect to the network.


Next


Privacy SettingsAccept CookiesAccept Cookies SolutionDesc3=xxxxx
Verizon SignIn Page

Sign in

 

for personalized, convenient support

Did you know?

Many equipment problems can be fixed in less than
5 minutes!

Make sure your equipment is plugged in and that the power is working in the rest of your house

 

My Verizon

  • Check Email
  • Add or Change Plan
  • Suspend My Service
  • Apps

Support

Watch Fios