Verizon Support
Customers With Disabilities
Home
Verizon SignIn Alerts

FiOS Internet



Assigning a WEP encryption key  
Link to Step 1Link to Step 2Link to Step 3Link to Step 4Link to Step 5Link to Step 6
Creating a wireless network with a Verizon MI424WR router in Windows XP

  1. If you are creating a new home network, it's recommended that you use the default WEP 64/40 bit encryption assigned by Verizon and displayed in the Key Code field. This simplifies network installation and makes troubleshooting easier.
    • The default WEP encryption key is displayed on the label attached to the bottom of your router for easy reference.
    • All hardware attached to your home network must use the same WEP key.


    Figure depicting Key Code field

  2. If you're replacing the router on an established home network, you may want to change the default WEP key to that of your previous network. This eliminates the need to change the WEP key on all the wireless network adapters used to connect additional computers.


  1. Review your wireless security settings in the "Current Wireless Status" section. If they are correct, write them down for future reference. [Show Me]


  2. Click Apply.


Continue with Step 5


Privacy SettingsAccept CookiesAccept Cookies SolutionDesc3=15851;SolutionDesc2=42665
Verizon SignIn Page

Sign in

 

for personalized, convenient support

Did you know?

Many equipment problems can be fixed in less than
5 minutes!

Make sure your equipment is plugged in and that the power is working in the rest of your house

 

My Verizon

  • Check Email
  • Add or Change Plan
  • Suspend My Service
  • Apps

Support

Watch Fios