Verizon Support
Customers With Disabilities
Home
Verizon SignIn Alerts

FiOS Internet



 Re-entering the WEP key for your Verizon 9100EM network
  1. Select the level of WEP encryption you were using on your home network (64/40 bit or 128/104 bit).


  2. Figure depicting WEP key section

  3. Select the format for your WEP encryption key (Hex or ASCII). It must be the same as you assigned to all the other computers and devices connected to your wireless network.
    • If your router is using an older version of firmware, you will not see this option.


  4. Enter your network's WEP encryption key in the Key Code field. It must be the same as you assigned to all the other computers and devices connected to your wireless network.


  5. Click Apply to save your security settings.


  6. Close the Verizon 9100 configuration screen.




  Verizon 9100EM Troubleshooting


Privacy SettingsAccept CookiesAccept Cookies SolutionDesc2=43982
Verizon SignIn Page

Sign in

 

for personalized, convenient support

Did you know?

Many equipment problems can be fixed in less than
5 minutes!

Make sure your equipment is plugged in and that the power is working in the rest of your house

 

My Verizon

  • Check Email
  • Add or Change Services
  • Suspend My Service
  • Manage Services
  • Apps

Support

Watch Fios