Verizon Support
Customers With Disabilities
Home
Verizon SignIn Alerts

High Speed Internet

Installing the Actiontec GT704WG Gateway
  1. Plug the small, round end of the power supply into the power jack in the back of the Actiontec gateway. [Show me the power jack]


  2. Plug the power supply into an electrical outlet.


  3. Connect one end of the phone cord to the Line jack on the back of the Actiontec gateway. [Show me the phone line jack]


  4. Connect the other end of the phone cord directly into a phone jack or the 2-for-1 adapter. Do not connect the router to a filter.


  5. Plug the Ethernet cable into one of the Ethernet jacks on the back of the Actiontec gateway. [Show me the Ethernet jacks]


  6. Plug the other end of the Ethernet cable into the Ethernet jack in your computer.


figure depicting actiontec gateway cabling

  1. Turn the power switch on the back of the Actiontec gateway to the "on" position (off = 0 and on = I). [Show me the power switch]


  2. Wait for the Power, DSL, Internet, and Ethernet link lights on the front panel of the Actiontec gateway to turn steady green. This will take a few moments. [Show me the modem lights]



Need help? Use the Actiontec diagnostic lights to help troubleshoot the problem.


Next
Privacy SettingsAccept CookiesAccept Cookies SolutionDesc2=18211;
Verizon SignIn Page

Sign in

 

for personalized, convenient support

Did you know?

Many equipment problems can be fixed in less than
5 minutes!

Make sure your equipment is plugged in and that the power is working in the rest of your house

 

My Verizon

  • Check Email
  • Add or Change Plan
  • Suspend My Service
  • Apps

Support

Watch Fios