Verizon Support
Verizon SignIn Alerts


Programming your Scientific-Atlanta AT8850™ AllTouch® Remote To set up your Scientific-Atlanta AT8850 AllTouch remote, follow the steps below:
  1. Find the remote codes for the devices you want to set up. You can find the latest codes below:

    Audio Receivers
    Audio Amplifiers

    In addition, remote codes are listed in the Scientific-Atlanta AT8550 AllTouch Remote Control User Guide.

  2. Turn on the device you want to program into your remote, for example if you are programming your remote to control your TV, then turn on the TV.

  3. Press and hold Select and the appropriate device button until all of the mode buttons blink twice.

  4. Enter the remote code for the device (if there is more than one remote code listed for your equipment, start with the first remote code in the list).

  5. Point the remote at the device and press the Power button.

  6. Did the device turn off?
    Yes: Keep the code you wrote down above for future reference. You may need it again if the remote code is accidentally erased.
    No: Repeat these steps using the next remote code listed for your equipment.

    Note: If none of the listed codes work for your equipment, you can use your remote to manually search for a valid code.

  7. Repeat this procedure for each device you want to program into your remote control.

Verizon SignIn Page

Sign in


for personalized, convenient support

Did you know?

Many equipment problems can be fixed in less than
5 minutes!

Make sure your equipment is plugged in and that the power is working in the rest of your house


My Verizon

  • Check Email
  • Add or Change Plan
  • Suspend My Service
  • Apps


Watch Fios