Sonim Stone Mountain Phoenix Remote Speaker Microphone with Channel Selector for XP5s and XP8
No reviews
The Stone Mountain Phoenix Remote Speaker Microphone with Channel Selector was designed to handle even the most extreme work environments. Its MIL-STD-810G rating means it's proven tough against vibration, shock, solar radiation, pressure and temperatures. And it's IP68-rated for dust, dirt, sand and water resistance. Large and tactile Push-To-Talk (PTT) and emergency buttons make it easy to communicate at a moment's notice. Using your Sonim device's SecureAudio Connector, the Stone Mountain Phoenix Remote Speaker Microphone attaches to and draws energy from your headset for quick, reliable communication no batteries required.
Hear and be heard.
Switch between up to 10 different audio channels with convenient RampClik Volume Controls. WhisperTek™ sub-audible Tx audio and an OutLoud™ high Rx audio output speaker work together for improved sound and voice.
*IP68-rated to withstand dust, dirt and sand, and resistant to submersion up to a maximum depth of up to 5 feet of water for up to 30 minutes.
All specsHear and be heard.
Switch between up to 10 different audio channels with convenient RampClik Volume Controls. WhisperTek™ sub-audible Tx audio and an OutLoud™ high Rx audio output speaker work together for improved sound and voice.
*IP68-rated to withstand dust, dirt and sand, and resistant to submersion up to a maximum depth of up to 5 feet of water for up to 30 minutes.
CA residents: see the California Proposition 65 WARNING
Reviews
There are no reviews, be the first to write one.
Features
- Push-to-Talk simplex and full-duplex Remote Speaker Microphone
- Large PTT and emergency buttons
- RampClik Volume Control
- MIL-STD-810G tested
- WhisperTek sub-audible Tx audio
- OutLoud high Rx audio output speaker
- 50 mm. Neodymium speaker
- 100% gold-plated PCBs
- 360° rotating belt clip
- Manufacturer's 2-year limited warranty
Specs
- Microphone Sensitivity -40 dBV (0dB=1V/Pa)
- Microphone Output Impedance 1kHz 2.2k ohm
- Microphone Signal / Noise Ratio 1kHz 55 dB
- Speaker Output Power 1w -SPL Avg 101 +/-3 dB/116+ dB
- Speaker Impedance 8 +/- 15% Ohms @ 1000 Hz 1v
- Speaker Sensitivity -40 dBV (0dB=1V/Pa)
- Operating Temperature -30°C to +60°C
- Phoenix Cable Length: 6 ft.
SKU#
SKU#
SM-096962273620
What's in the box
- One Stone Mountain Phoenix Remote Speaker Microphone for XP5s and XP8
Sonim Stone Mountain Phoenix Remote Speaker Microphone with Channel Selector for XP5s and XP8 Reviews
There are no reviews, be the first to write one.
Sonim Stone Mountain Phoenix Remote Speaker Microphone with Channel Selector for XP5s and XP8 FAQs
There are no questions, be the first to ask one.