Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Kazuna eTalk MYFLIX - Add / Remove a Wi-Fi Connection

2026-10-17 12:02:43.572

Kazuna eTalk MYFLIX - Add / Remove a Wi-Fi Connection

Here's how to connect to a Wi-Fi network or remove a saved connection on your eTalk MYFLIX.
  1. From a Home screen on your Kazuna eTalk MYFLIX™, navigate:
    Settings Settings icon
    Network & internet
    Wi-Fi
    .
  2. Ensure the Use Wi-Fi switch is turned on On icon.
  3. Perform one of the following:
    • Connect to an Available Wi-Fi Network
      1. Tap the preferred network.
      2. Enter the appropriate password then tap
        CONNECT
        .
        To view the password as it is being entered, tap
        Show password
        .
    • Manually Connect to a Wi-Fi Network
      1. Tap
        Add network
         (scroll down if needed).
      2. From the Network name (SSID) field, enter the appropriate name.
      3. Tap the 'Security field'
        dropdown menu
         .
      4. Tap the applicable security option (e.g., None, Enhanced Open, WPA/WPA2 PSK, etc.).
      5. Tap
        Advanced options
         to enable any additional settings (e.g., Proxy settings, IP settings, etc).
      6. Enter the appropriate password then tap
        SAVE
        .
    • Remove a Wi-Fi Connection
      1. Tap the
        Gear icon
         Gear icon to the right of the Wi-Fi network being removed.
      2. Tap
        FORGET
        .