Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Kyocera DuraForce Ultra 5G UW - Add / Remove a Wi-Fi Connection

2026-10-05 03:02:15.347

Kyocera DuraForce Ultra 5G UW - Add / Remove a Wi-Fi Connection

Here's how to connect to a Wi-Fi network or remove a saved connection on your DuraForce Ultra 5G UW.
  1. Open the
    Settings app
     Settings icon.
  2. Navigate:
    Network & internet
    Wi-Fi
    .
  3. Ensure the Use Wi-Fi switch is turned on On switch.
  4. Perform one of the following:
    • Connect to an Available Wi-Fi Network
      1. Tap the preferred network.
      2. Enter the appropriate password then tap
        CONNECT
        .
        To view the password as it is being entered, tap
        Show password
        .
    • Manually Connect to a Wi-Fi Network
      1. Tap
        Add network
         (scroll down if needed).
      2. From the Network name (SSID) field, enter the appropriate name.
      3. Tap the 'Security field'
        dropdown menu
         Dropdown menu icon.
      4. Tap the applicable security option (e.g., None, WEP, WPA/WPA2-Personal, etc).
      5. From the Password field, enter the appropriate password then tap
        Connect
        .
      6. Tap
        Advanced options
         to enable any additional settings (e.g., Proxy settings, IP settings, etc).
    • Remove a Wi-Fi Connection
      1. Tap
        Saved networks
        .
      2. Tap the applicable network then tap
        FORGET
        .