Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Kyocera DuraForce Ultra 5G UW - Change Network Mode

2026-10-02 11:58:05.173

Kyocera DuraForce Ultra 5G UW - Change Network Mode

If your DuraForce Ultra 5G UW drops calls due to being near a network border, locking onto a specific network can help; however, roaming charges may apply.
  1. Open the
    Settings app
    .
  2. Navigate:
    Network & internet
    Mobile network
    .
  3. From the Network section, tap the appropriate setting:
    • Automatically select network (recommended)
      Tap the switch to turn on or off.
      When turned on, the preferred network is automatically selected. Turning off this setting and manually selecting a different network may impact the service.
    • Manual
      Automatically select network must be off, then from the 'Choose network' screen, select a network.
      You can manually select an alternate carrier but it may require as many as 6 registration attempts with that carrier before successful registration.