Stream TV - LED Status Indicators
View this info for explanations of status LEDs on your 1st-generation Stream TV.
- The steps below apply to the original Stream TV, which can be identified by the Ethernet port on the back of the device. If you have the 2nd-generation Stream TV model, refer to Stream TV - LED Status Indicators.
- An LED indicator is located on the front of the Stream TV.
LED Indicator Guide
Device Status | Description | LED Status |
Booting Up | The Stream TV is connected to power and in the process of booting up. | Soft Blink White |
Not connected to display or remote | The Stream TV has no HDMI connectivity or is not paired to remote control. | Solid Red |
Pairing remote via Bluetooth | Until paired to remote or 12 minute time out. | Hard Blink Blue |
No internet | The Stream TV is not connected to the internet | Solid Yellow |
Device setup complete | All connections are complete. | 60% dim Solid White |
Device Standby | TV is connected but turned off. | 20% dim Solid White |
FOTA Update | Firmware Over-the-air update in progress | Fast Blink White |
Factory Reset | The Stream TV is being reset and booting up. | Fast Blink Yellow |
Error | Firmware or Hardware critical failure or overheating issue | Hard Blink Red |