Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

MOTOROLA EDGE+ 5G UW - Add / Remove Fingerprint Recognition

2026-10-12 16:50:27.181

MOTOROLA EDGE+ 5G UW - Add / Remove Fingerprint Recognition

Here's how to set up fingerprint recognition on your motorola edge+ 5G UW.
For the fingerprint scanner to operate, hands must be clean and moisture-free.
  2. Open the
    Settings app
    .
  3. From a Home screen, navigate:
    Security & Privacy
    Device lock
    Fingerprint
    .
  4. Enter the current PIN, password or pattern.
  5. Do one of the following:
    • First-Time Setup
      1. From the 'Unlock with your fingerprint' screen, review the info then tap
        Set up
         in the lower right.
      2. Place your finger on the
        sensor
         (Power button) until it vibrates then lift it and repeat this step until the process is complete.
      3. Tap
        Done
        .
    • Add More Fingerprints
      1. Tap
        Add fingerprint
        .
        Up to 5 fingerprints can be registered on the device.
      2. Place your finger on the
        sensor
         (Power button) until it vibrates then lift it and repeat this step until the process is complete.
      3. Tap
        Done
        .
    • Remove Fingerprint(s)
      1. Tap the
        Delete icon
         Delete icon to the right of the fingerprint you want to remove then tap
        Delete
        .
      2. If presented with 'Remove all fingerprints?', tap
        Yes, remove
         if desired.