Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

SHARP ROUVO V - Add / Remove a Wi-Fi Connection

2026-10-12 07:43:56.707

SHARP ROUVO V - Add / Remove a Wi-Fi Connection

Here's how to connect to a Wi-Fi network or remove a saved connection on your ROUVO V.
  1. Open the
    Settings apps
    .
  2. Navigate:
    Network & internet
    Wi-Fi
    .
  3. Ensure the
    Wi-Fi switch
     (at the top) is turned on.
  4. Perform one of the following:
    • Connect to an Available Wi-Fi Network
      1. Tap the preferred Wi-Fi network.
      2. If presented, enter the appropriate password then tap
        Connect
        .
        To view the password as it is being entered, tap (check)
        Show password
        .
        If necessary, tap
        Advanced options
         to ensure any additional settings (e.g., Proxy settings, IP settings, etc.) are configured appropriately.
    • Manually Connect to a Wi-Fi Network
      1. Tap
        Add network
        .
      2. From the Network name (SSID) field, enter the appropriate name.
      3. Tap the 'Security field'
        dropdown menu
         .
      4. Tap the appropriate security option (i.e., None, Enhanced, WEP, etc.).
      5. If necessary, tap
        Advanced options
         to enable any additional settings (e.g., Proxy settings, IP settings, Privacy, etc).
      6. From the Password field, enter the appropriate password then tap
        Connect
        .
    • Remove a Wi-Fi Connection
      1. Tap the Wi-Fi network you wish to remove.
      2. Tap
        FORGET
        .