Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Samsung Galaxy Z Fold4 - Add / Remove Fingerprint Recognition

2024-12-14 14:21:45.303
For the fingerprint scanner to operate, hands must be clean and moisture-free.
  1. From a Home screen, navigate:
    Settings Settings icon
    Security and privacy
    Biometrics
    .
  2. Tap
    Fingerprints
    .
  3. Enter the current PIN, password or pattern.
  4. Perform one of the following:
    • First Time Setup
      1. From the Fingerprints screen, review the info then tap
        Continue
        (at the bottom).
      2. Follow the on-screen tutorial to scan your fingerprint then repeat as necessary until the process completes.
      3. Tap
        Done
        (lower-right).
      4. Tap the
        Fingerprint unlock switch
        to turn on Switch on or off Switch off.
    • Add More Fingerprints
      1. Tap
        Add Fingerprint
        .
        Up to 3 fingerprints can be registered on the device.
      2. Follow the on-screen tutorial to scan your fingerprint then repeat as necessary until the process completes.
      3. Tap 'Done' if finished or 'Add' to continue adding fingerprints.
    • Remove Fingerprint(s)
      1. Touch and hold a fingerprint until a blue checkmark appears.
      2. Select any additional fingerprints to delete.
        To delete all fingerprints, tap
        All
        (upper-left)
      3. Tap
        Remove
        (at the bottom).
      4. To confirm, review the disclaimer then tap
        Remove
        .