Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

One Talk CP925 / CP965 IP Conference Phones
Activate / Set Up Device

2026-10-23 04:06:39.948

One Talk CP925 / CP965 IP Conference Phones
Activate / Set Up Device

Activate your One Talk CP925 / CP965 IP conference phone to get started. This ensures you can make calls and connect to your company network.

Before you begin

Activation requires a valid US address for E911 functionality.
Wi-Fi Calls always originate in the U.S., even when you're outside of the U.S.
  • Calls to U.S. numbers are not billed (except for 411 or other premium calls).
  • Calls to international numbers are billed according to your international long distance plan.
A soft reset is needed on the desk phone when a new endpoint is added to the One Talk MDN.

Steps

  1. Connect the power and wired network.
    This conference phone requires the Yealink original (54V/0.56A) Power-over-Ethernet (PoE) adapter, which provides power and wired network connection using the same Ethernet cable.
    You can also connect to a Wi-Fi network after startup. Refer to Step 3 for more information.
    Power connectors
  2. If desired, connect a USB flash drive (for use with the USB Call Recording feature).
  3. To configure Wi-Fi via the user interface, do the following:
    1. From the idle screen, navigate:
      More
      Settings
      Wi-Fi
      .
    2. If necessary, tap
      Turn on Wi-Fi
      .
    3. Tap the desired network (SSID) to connect to it.
      If the network you want to connect to isn't listed, tap the
      3-dot Options icon
       then tap
      Scan
       to search for available networks.
    4. If the network is secure, enter its password then tap
      Connect
      .
      If necessary, tap (check)
      Show advanced options
       to configure the HTTP proxy for the Browser application.
  4. Wait for the device to start up:
    1. After the IP phone is connected to the network and supplied with power, it automatically begins the initialization process.
    2. From the 911 notification screen, tap
      OK
      .
      The 911 screen displays after successful activation.