Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

TCL LINKZONE 5G UW - MAC Filtering

2026-10-15 06:07:48.257

TCL LINKZONE 5G UW - MAC Filtering

Here's how to control MAC address access for your LINKZONE 5G UW.
  • MAC Filter is an advanced feature. Contact your local IT admin prior to altering this setting.
  • If turned on, only the devices added to the MAC address filter list can access your Linkzone 5G UW Primary Wi-Fi network.
  • This MAC filter has no effect on the guest Wi-Fi network or USB devices.
  2. From the Network Settings section, click the
    Navigation arrow
     Navigation arrow (lower-right).
  3. From the left pane, click
    Settings
     then click
    Advanced Settings
    .
  4. Review the caution message then click
    OK
    .
  5. Click the
    MAC Filter
     tab.
  6. Do any of the following:
    • Add a device to the list (Whitelist):
      From the MAC Filter dropdown box, select
      Whitelist
      .
      1. Click the
        Add icon
         Add icon.
        To add a device currently connected, select (check) from the list of devices then click
        Apply
        .
      2. Click
        Add manually
        .
      3. Enter the Device name and MAC Address to grant access.
      4. Click
        Apply
         (lower-right).
    • Block a device (Blacklist):
      From the MAC Filter dropdown box, select
      Blacklist
      .
      1. Click the
        Add icon
        .
        To deny a device currently connected, select (check) from the list of devices then click
        Apply
        .
      2. Click
        Add manually
        .
      3. Enter the Device name and MAC Address to grant access.
      4. Click
        Apply
         (lower-right).
    • Turn off MAC Filtering:
      1. From the MAC Filter dropdown box, select
        Diable
        .