Session status messages
Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

TCL 40 XE 5G
Insert or Remove SD / Memory Card

2026-11-22 04:03:51.74

TCL 40 XE 5G
Insert or Remove SD / Memory Card

If your TCL 40 XE 5G is low on storage, use an SD card for extra space. Follow these steps to insert or remove it without losing data.

Before you begin

Don't try to insert or remove the SD card while your TCL 40 XE 5G is powered on. Doing so may harm the SD / memory card and/or the device.

Steps

  1. From the left side of the device with the display facing up, remove the card tray.
    Use the insertion / removal tool (or a paperclip) to unlock the card tray by inserting it into the provided slot then remove the tray.
    Remove tray
  2. Do one of the following:
    • To insert an SD / memory card: Place the SD / memory card in the card tray with the gold contacts facing down.
      Insert SD card
    • To remove an SD / memory card: Once the card tray is removed, lift and remove the SD / memory card from the tray.
      Remove SD card
  3. Push the card tray back into the device.