Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Orbic JOURNEY PRO / JOURNEY PRO LITE - Insert / Remove Battery

2026-10-10 16:42:16.875

Orbic JOURNEY PRO / JOURNEY PRO LITE - Insert / Remove Battery

Here's how to insert / remove the battery for your JOURNEY PRO / JOURNEY PRO LITE.
  1. Ensure the Orbic® JOURNEY PRO / JOURNEY PRO LITE is powered off.
  2. Remove the battery cover.
    Insert your fingernail into the cutout located on the lower-center of the battery cover to lift and remove the cover.
    Remove Battery Cover
  3. Do one of the following:
    • Insert battery
      Make sure the gold contacts line up then press down gently to secure.
    • Remove battery
    Battery position
  4. Attach the battery cover.
    Press down along the edges to lock the cover into place.