Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Orbic SPEED X 5G
LAN Settings

2026-10-13 10:15:26.896

Orbic SPEED X 5G
LAN Settings

Customize LAN settings (e.g., IP, subnet, DHCP, etc.) on your Orbic® SPEED X 5G for better Wi-Fi control. Consult your IT or network admin to avoid connectivity issues.

Steps

  2. From the Settings section, click the
    Arrow icon
    .
  3. Click the
    Advanced tab
    .
  4. Review the warning message then click
    Continue
    .
  5. Click the
    LAN
     tab.
  6. To turn on IP Passthrough, click
    Turn on IP Passthrough
    .
  7. From the IPPT Interface dropdown menu, select one of the following then enter the MAC Address.
    • Ethernet
    • USB
  8. Enter the desired IPv4 info into the following fields:
    • IP Address
    • Subnet Mask
    • Turn on DHCP Server
    • DHCP Lease Time
    • Start DHCP Address Range at:
    • End DHCP Address Range at:
  9. If preferred, click
    Turn on IPv6
    .
  10. Click
    Save Changes
    .