Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

All Access Home Internet Modem
Activate / Set Up Device (Trial)

2026-10-16 20:00:08.635

All Access Home Internet Modem
Activate / Set Up Device (Trial)

Learn how to quickly activate and set up your All Access Home Internet Modem to start browsing, streaming, and working in no time.

Before you begin

Ensure the 5G Home Modem is still connected to the original coax cable, plugged into the same electrical outlet and in the same configuration in which it was professionally installed.

Steps

  1. Connect a coax cable from the coax port on the 5G Modem to a coax outlet.
  2. Connect the power cord to the 5G Modem then to an electrical outlet.
  3. Connect the Ethernet cable from the router WAN port to the Ethernet port on the 5G Modem.
  4. Connect the power adapter to the router and plug it into a power outlet.