Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

One Talk W92LTE 4G DECT Base Station
Check Internet Connectivity

2026-10-08 17:05:31.929

One Talk W92LTE 4G DECT Base Station
Check Internet Connectivity

Your One Talk W92LTE 4G DECT base station requires an internet connection to function. Follow these steps to confirm your phone is connected and ready for use.

Before you begin

The following is provided for informational purposes only. Contact your IT admin to verify the following info.
Verifying the IP address on the phone ensures the phone is communicating with the router; this doesn't necessarily mean the phone has access to the internet. See One Talk Ports and Protocols for correct internet settings on the router and desk phone.
If the desk phone doesn't display an IP address, contact your IT admin to ensure the desk phone is allowed to communicate over the business network.

Steps

  1. Check for proper installation:
    1. Ensure the phone is properly plugged into a functional AC outlet.
    2. For LAN mode, ensure the Ethernet cable is plugged into the Ethernet port on the back of the phone. Ensure an LTE connection is available for LTE mode.
    3. If not receiving an IP address from the router, try using a different Ethernet port.
    4. Ensure the switch or hub in your network is operational.
  2. From the idle screen, navigate:
    Ok
    Status
    Base
     then view the IP Address.
    Confirm the IP Address with your system admin.