Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

One Talk W92LTE 4G DECT Base Station
Switch Between LTE and LAN Mode

2026-10-08 17:05:49.646

One Talk W92LTE 4G DECT Base Station
Switch Between LTE and LAN Mode

Your One Talk W92LTE 4G DECT base station operates in LTE mode by default, but certain functions may require it to be set to LAN mode. Follow these instructions to set your phone to match your needs.

Before you begin

The W92LTE base station must first be activated over an LTE connection. If the device has never activated over the Verizon network, perform initial activation before trying to switch to LAN mode. If necessary, refer to Activate / Set Up Device for details.
The handset automatically prompts you to switch between LAN and LTE modes based on certain network conditions, but you can also choose the operating mode manually.

Steps

  1. From the idle screen on the handset, press the
    Center navigation button
    .
  2. Navigate:
    Settings
    Account Mode
    .
  3. Select
    LAN Mode
     or
    LTE Mode
     then select
    Save
    .