Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Verizon Voice Gateway
Add / Remove a Wi-Fi Connection

2026-10-16 22:35:50.298

Verizon Voice Gateway
Add / Remove a Wi-Fi Connection

Connect your Verizon Voice Gateway to a Wi-Fi network or remove a saved one. This can help with troubleshooting or make it easier to connect to networks you use.

Before you begin

Ethernet connections have the highest priority. If an Ethernet cable is plugged into the Voice Gateway, unplug it before attempting to connect to a Wi-Fi network.
It can take between 30 seconds to 2 minutes for the device to switch between a Wi-Fi connection and a cellular network.

Steps

  1. From the Home screen, press the
    Center button
     to open the menu.
    Use the Up and Down buttons to navigate and the Center button to select.
  2. Navigate:
    Settings
    Network
    Join Wi-Fi
    .
  3. Do one of the following:
    • To connect to a Wi-Fi network by entering its settings:
      1. Ensure the Wi-Fi switch is on.
      2. Highlight
        Network list
         then press the
        Center button
         to scan for available networks.
      3. Select your Wi-Fi network, enter the password then select
        Next
        .
    • To easily connect to a network using WPS:
      1. Highlight
        WPS pairing
         then press the
        Center button
         to start the pairing process.
      2. Press the
        WPS button
         on your Wi-Fi router.
    • To turn off or remove a Wi-Fi connection:
      1. Press the
        Center button
         to turn the switch Off.