Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Samsung Galaxy Watch Ultra2
Add / Remove a Wi-Fi Connection

2026-10-12 01:16:40.666

Samsung Galaxy Watch Ultra2
Add / Remove a Wi-Fi Connection

Connect your Galaxy Watch Ultra2 to a visible or hidden Wi-Fi network or remove a saved one. This can help with troubleshooting or make it easier to connect to networks you use.
  1. From the watch screen, open the
    Settings app
    .
  2. Navigate:
    Connections
    Wi-Fi
    .
  3. Ensure Wi-Fi is turned on, then do one of the following:
    • To connect to an available Wi-Fi network:
      1. Tap the desired available Wi-Fi connection.
      2. Tap
        Password
        , enter the password then tap
        Connect
        .
    • To manually connect to a Wi-Fi network:
      1. Tap
        Add network
        .
      2. Tap
        Network name
         then enter the name of the desired network.
      3. Tap
        Security
         then select the security type (e.g., None, WEP, WPA, etc.).
      4. Tap
        Password
        , enter the password then tap
        Done
        .
      5. Tap
        Save
        .
    • To remove a Wi-Fi connection:
      1. Tap the desired Wi-Fi connection.
      2. Tap
        Forget
        .