OtterBox Symmetry Series Flex Case for Galaxy Z Flip4
3.3 out of 5 rating
28 ReviewsProtect your phone from drops, bumps and dings with the Symmetry Series Flex Case for Galaxy Z Flip4. Made in part with up to 40% recycled plastic, this ultra-sleek design is made for foldable phones. Built-in hinge protection and raised edges provide extra cushioning for the hinge, camera and screen. It's easy to install, and the lasting antimicrobial protection shields your case from dirt and germs.¹ And, it's wireless charging compatible, so you don't have to remove your case to charge your phone.
OtterBox tough.
OtterBox puts their cases through rigorous testing. OtterBox Certified Drop+ Protection is backed by 24+ tests and 238+ hours of testing, so you know you are getting a tough-as-nails case.²
¹ Helps protect the case exterior against many common bacteria. It does not protect you or the screen.
² Based on independent testing.
All specsOtterBox tough.
OtterBox puts their cases through rigorous testing. OtterBox Certified Drop+ Protection is backed by 24+ tests and 238+ hours of testing, so you know you are getting a tough-as-nails case.²
¹ Helps protect the case exterior against many common bacteria. It does not protect you or the screen.
² Based on independent testing.
Reviews
3.3
3.3 out of 5 rating
28 reviews
43% of reviewers recommend this product.
flip z cover
3 out of 5 rating
david smidt . 1 year ago
time will tell how well it works. I hope better than the other one I had.
OtterBox Customer Support - 1 year ago
Hello! We hope that with time and use you enjoy the Symmetry Series Flex case for your device. Should any questions arise, or should our Customer Service Team be able to help with anything, please do not hesitate to reach out, as we are always happy to help!
Not a good fit
2 out of 5 rating
TheBoone . 1 year ago
Well if you drop your phone ot won't break, it's an otterbox and does the job.
Cons: the sliding halves will turn the volume up to max if you bump it in your pocket. It pops off really easily if it gets stuck in your pocket and doesn't always put phone to sleep when you close it.
OtterBox Customer Support - 1 year ago
Hello! We apologize that you are having additional mobility with the case while in your pocket. We have a great warranty, and we would be more than happy to get you a new product via warranty replacement. Please give our CS Team a call at 1-855-688-7269 and we are happy to help with this!
Features
- Ultra-sleek design for foldable phones
- Built-in hinge protection
- Raised edges protect camera and screen
- OtterBox Certified Drop+ Protection²
- Wireless charging compatible
- Made in part with up to 40% recycled plastic
- Easy installation
- Lasting antimicrobial properties protect your case¹
SKU#
SKU#
77-90421
What's in the box
- OtterBox Symmetry Series Flex Case for Galaxy Z Flip4
OtterBox Symmetry Series Flex Case for Galaxy Z Flip4 Reviews
3.3
3.3 out of 5 rating
28 reviews
43% of reviewers recommend this product.
flip z cover
3 out of 5 rating
david smidt . 1 year ago
time will tell how well it works. I hope better than the other one I had.
OtterBox Customer Support - 1 year ago
Hello! We hope that with time and use you enjoy the Symmetry Series Flex case for your device. Should any questions arise, or should our Customer Service Team be able to help with anything, please do not hesitate to reach out, as we are always happy to help!
Not a good fit
2 out of 5 rating
TheBoone . 1 year ago
Well if you drop your phone ot won't break, it's an otterbox and does the job.
Cons: the sliding halves will turn the volume up to max if you bump it in your pocket. It pops off really easily if it gets stuck in your pocket and doesn't always put phone to sleep when you close it.
OtterBox Customer Support - 1 year ago
Hello! We apologize that you are having additional mobility with the case while in your pocket. We have a great warranty, and we would be more than happy to get you a new product via warranty replacement. Please give our CS Team a call at 1-855-688-7269 and we are happy to help with this!
Otterbox flip case
3 out of 5 rating
JTSCMU . 1 year ago
Yes, I'd recommend this product.
Good protection, but lousy desgin. I added some adhesive to keep the case from falling off.
OtterBox Customer Support - 1 year ago
So sorry for any trouble you've had with the Symmetry Series Flex case for your Galaxy Z Flip4. We're happy to hear that the protection has been up to your standards though. We appreciate you taking the time to share your thoughts on this case with us and we'll be sure to share your feedback with our design team for you. Please don't hesitate to give our CS team a call at 1-855-688-7269 with any questions, concerns, or if we can be of any additional help to you.Warm Regards,
OtterBox Customer Support

Presses on the volume
4 out of 5 rating
A Thought . 2 years ago
Sometimes if the top case is not fitting correctly it may press the up or down side key. If you use that for volume you may have sharp increases in sound or it will go all the way down to zero. Besides that it's good...
Great product to protect your phone...
5 out of 5 rating
John V . 2 years ago
Yes, I'd recommend this product.
I drop my phone quite often and so far so good. No scratch or phone/screen damage at all.
protection
5 out of 5 rating
NM Roadrunner . 2 years ago
good protection. actually apparently only protection
Flip z4
5 out of 5 rating
Casperman . 2 years ago
Yes, I'd recommend this product.
I have had this case for a month now and it works great. I work in a shop environment and have always used otter boxes. This one is very rugged and protects my flip phone , it does make the phone much thicker. But I don't have to worry about dropping it on a hard surface.
slips
2 out of 5 rating
Derek . 2 years ago
as you open it, the cases slides. Constant fight
OtterBox Customer Support - 2 years ago
A constant fight is not something you should have to deal with when it comes to your OtterBox and keeping your Z Flip4 safe from harm. We're finding that if you push whichever piece (top or bottom) of the case down into place after opening that it stays in place. Does that seem to work for you as well or are the components feeling loose throughout?Feel free to give our friendly Otters a call at 1-855-688-7269 if we can be of further assistance and we'll get right on the case!
Best,
OtterBox Customer Service Team

Two major flaws
2 out of 5 rating
Robber72 . 2 years ago
The positives of this case are it fits very well and offers a high level of protection. Unfortunately, as received the hinge cover binds when opening and actually pushes the top case section halfway off the phone. It can be pushed back but that is not a good feature. I was able to correct that problem buy widening the slots in the hinge cover that are guided by internal pins. That completely eliminated the binding. So, it now works great but the hinge cover drags against the metal trim on the phone as it is closed. With even a little amount of dust, this will sand away at the phone finish and cause damage. I really wanted to like this case, but I cannot accept the inevitable damage it will cause to the phone from this wear.
OtterBox Customer Support - 2 years ago
We appreciate the insight as to what's going both right and wrong with your current Otter experience. You certainly shouldn't have to make any modifications in order to have things stay properly in place, and you also shouldn't have to worry about the finish of your Z Flip4 when using the case.We'll make certain that our quality and design teams are made aware of your concerns so they can dig in and see why such things would potentially be occurring. In the meantime, please do feel welcome to give our friendly Otters a call at 1-855-688-7269 if we can be of any further assistance and we'll always be happy to help.
Kindly,
OtterBox Customer Service Team

Love otter box cases but they failed with this one
1 out of 5 rating
Jessijay . 2 years ago
I normally stick with otter box for all my phones and my families phone but they dropped the ball on this case. The problem is when the phone is flipped open, the top of the phone case gets pushed up by the piece that is supposed to slide behind the bottom piece. The grip on the top part of the phone is somewhat lose which another reviewer stated would concern them as the case got older. It does me as well. It also doesn't come with a cover for the c-charger either. Probably has to do with the specific model but I'm used to having it on my phone since I do a lot of outside work. I will be returning this to otter box after I find something suitable for this phone. I'm disappointed to say the least.
OtterBox Customer Support - 2 years ago
Thanks for always making Otter your go-to, we really do appreciate the support! And we're sorry to hear that you've had a bit of a ball-dropped sorta experience with your most recent case. As a fairly streamlined model, we opted to leave that charge port area open for easy access, but we'll definitely pass your feedback on that along to our design folks. As for the top piece pushing up a bit, although that is a dynamic that some other folks have noticed as well, we have found that simply pushing it back down after opening the device will keep it in place.Sounds like you'll be moving on to something that better fits your needs and taste, but we do hope you'll keep us in mind down the road. If we can ever be of any assistance in the future, please feel welcome to give us a call at 1-855-688-7269 and we'll always be happy to help!
Kindly,
OtterBox Customer Service Team

OtterBox Symmetry Series Flex Case for Galaxy Z Flip4 FAQs
There are no questions, be the first to ask one.