Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Verizon LTE Internet and Home Phone
Activate / Set Up Device

2026-10-02 20:31:57.942

Verizon LTE Internet and Home Phone
Activate / Set Up Device

Here's how to quickly set up your Verizon LTE Internet and Home Phone.

Before you begin

If you are activating an exchange for a previous device, it may require that the SIM number of the new device be manually entered before completing the process below.
Confirm that your computer is compatible with all major operating systems (e.g, Android™, Google Chrome®, Safari, etc.).

Steps

  1. Insert and charge battery.
  2. If desired, install the optional antenna.
    If using the optional antenna, align it with the antenna port on the router and attach securely.
    Use supplied cable only and use its full length to position the antenna as far away from the router as possible.
    If mounting the antenna to a wall, position it as far off the ground as possible.
    Don't operate the router and antenna within 2 inches of each other.
  3. Connect the power adapter as follows:
    1. Plug the power cord into the designated power port.
    2. Plug the power adapter into a wall outlet.
      LTE Internet and Home Phone automatically powers on then guides you through the welcome process for connecting to Wi-Fi.
      If needed, the Wi-Fi Name (SSID) and password can be obtained after an initial power-up or a factory reset as follows:
      1. Power on the device.
      2. Select
        Menu
        .
      3. Select
        Open
        to display the Wi-Fi name/password.
    3. Once welcome process completes, ensure at least 1 bar shows for the voice strength signal indicator.
      If at least 1 bar doesn't show, move to an alternate location with a stronger signal.
  4. Connect your telephone as follows:
    Don't plug the Verizon LTE Internet and Home Phone into a telephone jack.
    1. Unplug telephone cord from wall's telephone jack.
    2. Plug the end of the telephone cord that was removed from the wall jack into one of the two phone ports on the back of the device.
      The other end of the telephone chord must remain plugged into the back of the telephone's base unit.
  5. Make a test call.
  6. If desired, set up a voicemail account.
  7. If desired, plug an Ethernet cable into one of the 3 designated ports.
    The other end of the cable must remain plugged into the Ethernet port of the device you wish to connect.