Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Verizon Jetpack ® 4G LTE Mobile Hotspot MiFi ® 6620L - Restore Settings to Factory Defaults

2026-10-05 21:15:07.758

Verizon Jetpack® 4G LTE Mobile Hotspot MiFi® 6620L - Restore Settings to Factory Defaults

If your Jetpack MiFi 6620L powers off, crashes/resets, freezes or runs slow, here's how to reset it.
Restore Settings to Factory Defaults only if absolutely necessary as it:
  • Removes all modified settings including Network Name (SSID), Wi-Fi/Admin Password, etc.
  • Restores the default settings viewable on the external LED of the device.
  1. Ensure the device is powered on.
  2. Remove the battery cover from the bottom of the device.
    Utilizing the provided slot, carefully lift then detach the cover.
    Battery Cover Open
  3. Using a paperclip (or similar tool), press and hold the
    Reset button
    (located down inside the square opening labled RESET) until "MiFi Restarting" or "MiFi Resetting" appears on the display, then release.
    Master Reset Button location
  4. Replace the battery cover.
    After restoring to factory defaults, ensure Power Management Settings are set to the preferred options.
Alternatively, a restore can also be done as follows:
  2. From the left menu, click
    Jetpack Settings
    .
  3. From the Jetpack tab, click
    Backup and Restore
    .
  4. From the Restore to Factory Defaults section, click
    Restore Factory Defaults
    .
  5. Click
    Confirm
    .
    After restoring to factory defaults, ensure Power Management Settings are set to the preferred options.