Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

ASUS ZenPad ™ Z10 - Add a Personal / Corporate Email Account

2026-10-14 09:33:34.625

ASUS ZenPad™ Z10 - Add a Personal / Corporate Email Account

Here's how to set up a personal / corporate email account on your ZenPad Z10.

Add a Personal Email Account

  1. From a Home screen, navigate:
    Apps icon Apps icon
    Settings Settings icon
    Accounts
     (Personal section).
  2. Tap
    Add account
    .
  3. Enter the email address and password then tap the
    Next
     (lower-right).
  4. If presented, tap the appropriate account type (e.g., POP3, IMAP).
  5. Enter the appropriate info (e.g., Username, Password, Security type, etc.) then tap
    Next
    .
    If not presented, skip to step 9.
    If you're not sure what your server info is, here are some common personal email server addresses. Contact your email provider if additional assistance is needed or your server info isn't listed.
  6. Enter the appropriate info (e.g., SMTP server, Port, Security type, etc.) then tap
    Next
    .
  7. Configure account options (e.g., Inbox checking frequency, Email download size, etc.) as desired then tap the
    Next
    .
    Depending upon the email account type, the available options may vary
  8. If presented, configure optional settings (account name, outgoing name, signature) as desired then tap
    Next
    .

Add a Corporate Email Account

Verizon verifies access to data services only, which can be checked by viewing a website. If you need assistance setting up a corporate email account, contact your Exchange / IT admin.
  1. From a Home screen, navigate:
    Apps icon Apps icon
    Settings Settings icon
    Accounts
     (Personal section).
  2. Tap
    Add account
    .
  3. Tap
    Corporate
    .
    Check with your email provider or Exchange / IT admin to determine which account type to use.
  4. Enter your corporate email address and password then tap
    Next
     (located in the lower-right).
    If prompted, tap
    Continue
     to confirm.
    If set up is unsuccessful, tap
    Manual setup
    .
  5. If presented with a Remote security administration prompt, tap
    OK
     to confirm.
  6. Configure the account options (e.g., Inbox checking frequency, etc.) as necessary then tap
    Next
    .
  7. If presented with an Activate device administrator screen, tap
    Activate
    .
    Follow the on-screen steps to complete the applied security policy (e.g., Set up password, Device encryption).
    Device encryption can exceed 60 minutes. If prompted, connect your phone to a charging device to begin (battery charge must be at 80% or greater).
  8. If presented, configure optional settings (account name, outgoing name, signature) as desired then tap
    Next
    .