Samsung Galaxy S7 / S7 edge - Add / Remove Fingerprint Recognition
Here's how to set up and manage fingerprint recognition to unlock your Galaxy S7 / S7 edge.
For the fingerprint scanner to operate, hands must be clean and moisture-free.
- From a Home screen, navigate:.
- From the Biometrics section, tapFingerprint Scanner.
- Enter the current PIN, password or pattern.
- Perform one of the following:
- First Time Setup
- Place your finger on thefingerprint sensor(Home key) until it vibrates then lift and repeat until the scan completes.
- TapDONE(lower-right).
- If presented, tap theNotifications switch(upper-right) to turn on
or off
then tap
DONE.When on, configure any of the following:- Hide content: Tap to turn on or off.
- Notification icons only: Tap to turn on or off.
- Transparency: Slide theblue barleft or right to adjust the level while viewing the preview at the top.
- Auto-reverse text color: Tap to turn on or off. Reverses the color of notification text based upon background color.
- If presented, tapTURN ON(lower-right).
- Add More Fingerprints
- From the 'Manage fingerprints' section, tapAdd fingerprint.Up to 4 fingerprints can be registered on the device.
- Place your finger on thefingerprint sensor(Home key) until it vibrates then lift and repeat until the scan completes.
- TapDONE.
- Remove Fingerprint(s)
- From the 'Manage fingerprints' section, tapEDIT(upper-right).
- Tap (check) the fingerprint(s) to remove.To select all fingerprints, tapAll(upper-left).
- TapREMOVE(upper-right).
- To confirm, review the disclaimer then tapREMOVE.