Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Global Modem USB730L
Activate / Set Up Device

2026-10-20 07:37:59.924

Global Modem USB730L
Activate / Set Up Device

Activate your Global Modem USB730L to get started. This ensures you can make calls, send messages, and connect to the internet.

Before you begin

Ensure the following system requirements are met and the computer isn't connected to an alternate internet connection (e.g., LAN, Wi-Fi):
  • Operating Systems:
    • Windows® 7 or higher
    • Mac® OS X 10.8 or higher
    • Linux OS
    • Chrome™ OS
  • Browsers:
    • Microsoft® Internet Explorer 9 or higher
    • Mozilla Firefox® 3.6 or higher
    • Google Chrome 9 or higher
    • Apple® Safari® 5 or higher
    • Opera® 9 or higher

Steps

  1. Connect the USB modem to the computer.
    No additional software is needed to connect.
  2. Once the LED Status Indicator starts blinking green, open a web browser.
    It can take up to 2 minutes to connect. If you get a message that the device isn't responding, allow time for the device to complete the connection.
  3. If needed, navigate to:
    http://my.usb
     (IP address 192.168.1.1) then view the Network Status info located at the top.
    Only the customer with the installed modem and an active connection (as indicated by the status indicators) can access the web portal.