Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-05-15 05:26:14.189

Samsung Galaxy J3 V / Galaxy J3 (3rd Gen.) - Insert or Remove SD / Memory Card

Here's how to insert or remove an SD / memory card for your Galaxy J3 V / Galaxy J3 (3rd Gen.).
  1. Ensure the device is powered off.
  2. Using the notch (upper-right edge, when the device is face down) gently lift and remove the battery cover.
    Remove battery cover
  3. Locate the notch in the lower-right corner of the battery then lift the battery out.
    If applicable, refer to Insert the Battery.
    Remove battery
  4. Do one of the following:
    • Insert SD / memory card
      Insert the card with the gold contacts facing down.
      Insert memory card
    • Remove SD / memory card
      Remove memory card
  5. Align the gold battery contacts with the contacts in the battery compartment then gently press the battery into place.
  6. Align the battery cover then gently press to snap the cover into place.
    Replace battery cover