Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Inseego Business Phone Connect - Insert / Remove SIM Card

2026-10-23 03:03:29.109

Inseego Business Phone Connect - Insert / Remove SIM Card

Here's how to insert and remove the SIM card on your Business Phone Connect.
Do not attempt to insert or remove a SIM card while the device is powered on. Doing so may harm the SIM card and/or the device. The Business Phone Connect comes with the SIM card already installed.
  1. Ensure the device is powered off.
    Power button
  2. Remove the battery cover.
    Remove the battery cover
  3. If present, remove the AA batteries.
  4. Do one of the following:
    • Insert a new SIM card:
      With the gold contacts facing down, align the card (notch first) then gently push the card in until it clicks into place.
      Insert SIM
    • Remove SIM card:
      Gently push in on the card, then carefully pull out the SIM card.
      Remove SIM
  5. Insert the AA batteries.
  6. Replace the battery cover by setting it on the Business Phone Connect where the notches align, then press on the cover until it clicks into place.