Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-06-02 02:35:59.652

Samsung Galaxy Watch3 - Activate / Set Up Device

Here's how to activate and set up your Galaxy Watch3 via Number Share or as a standalone device.
If the Galaxy Watch was purchased outside of Verizon, contact us to start a line of service for your device.
Set up your Galaxy Watch3 using one of the following companion device options:
Expand All
  • The Galaxy Watch3 can be set up via Number Share or as a standalone device. To use the Galaxy Watch3 without a companion device, complete the steps below then refer to Set Up as a Standalone Device.
    To set up with Number Share, the companion smartphone must be activated on the same Verizon account as the Galaxy Watch3.
  • If you're replacing an existing Samsung smartwatch, refer to Replace Existing Device.
  • If you're pairing an existing Samsung smartwatch with a new Android smartphone, refer to Connect to New Phone.
  • Before completing the steps below, verify:
    • your companion Android smartphone has a cellular or Wi-Fi connection.
    • your eSim activation has been processed and you've received the QR code via email.
  1. Ensure the Galaxy Watch3 is is charged and powered on.
    If necessary, tap the watch display to begin.
  2. Install the Galaxy Wearable app Galaxy Wearables icon on the companion Android smartphone.
  3. Open the
    Galaxy Wearable app
    .
  4. Tap
    Start
    .
    tap Start
  5. If prompted, tap
    Allow
    to approve the necessary permissions.
  6. From the 'Pick your device' screen, tap
    Galaxy Watch3
    .
  7. If prompted, from the 'Devices spotted nearby' screen, tap the
    Galaxy Watch3
    .
  8. Ensure the passkey matches what's displayed on the Galaxy Watch3 then tap
    Confirm
    on the smartphone and the
    Checkmark icon
    Checkmark icon on the Galaxy Watch3.
    Allow a few minutes for pairing to complete.
  9. If using a non-Samsung Android smartphone to complete setup, tap
    OK
    then tap
    Install
    to allow the Gear Plugin and Samsung Accessory Service to install.
  10. Tap 'Samsung Terms and Conditions' and 'Samsung Privacy Notice' to review more info then accept (check) each option and tap
    Continue
    .
    Tap
    Details
    for more info.
    • Sending of diagnostic data (optional)
    • Mapping technologies by Here
    For your review screen
  11. If prompted, tap
    OK
    to link Galaxy Watch3 PlugIn with Galaxy Watch3.
  12. If prompted, tap
    Allow
    to let your Galaxy Watch3 access location, contacts, manage phone calls, access your calendar, access your phone call logs, and send and view SMS messages.
  13. If prompted, tap
    Sign in
    to complete the Samsung account setup and follow the on-screen steps.
    If you choose 'Skip', you can add a Samsung account after setup is complete.
  14. If prompted to Restore your watch from backups, do the following:
    1. Tap
      Check for backup
      to retrieve a previous Samsung smartwatch backup then tap
      Next
      .
      If you prefer to set up as new, tap
      Skip for now
      then tap
      Next
      .
      If troubleshooting, don't restore the device until all testing has been completed.
    2. Tap the
      dropdown
      then select the appropriate backup file.
    3. Select the data (e.g., Phone, Messages, etc.) you want to restore then tap
      Restore
      .
      Selected when a checkmark is present
  15. Do one of the following:
    If you choose 'Skip', you can add a cellular plan after setup is complete.
    • Set up with a QR code:
      1. Tap
        Use code
        .
        tap Use code
      2. Point the smartphone's camera at the QR code below and scan it.
        The QR code will only work if the Galaxy Watch3 has been activated on a Verizon mobile number.
        If prompted, tap
        Allow
        to grant camera permission.
        Scan QR Code
      3. Tap
        Use plan
        .
    • Set up without a QR code on an existing Verizon account with a new Number Share line of service (if the Galaxy Watch3 was purchased outside of Verizon):
      1. Tap
        Sign up for one now
        .
        tap Use codeSign up for one now
      2. Tap
        Next
        .
      3. Ensure the phone number to your Verizon smartphone is displayed then enter your My Verizon password and tap
        Continue
        .
        Only Account Owners or Account Managers can perform these steps. Here's additional info on account roles.
      4. Follow on-screen steps to select desired plan.
        Options vary by account plan.
  16. After mobile service has been set up, tap
    Done
    the 'Mobile service for your watch' screen.
    The watch restarts.
    This process may take up to 2 minutes.
Continue to use in conjunction with a companion smartphone for maximum functionality. To un-pair your companion smartphone and use the Galaxy Watch3 as a standalone device, reset the watch then set up as a standalone device.
Do not reset network settings during reset.
Standalone mode can't be used with Number Share.
  • The Galaxy Watch3 can be set up via Number Share or as a standalone device. To use the Galaxy Watch3 without a companion device, complete the steps below then refer to Set Up as a Standalone Device.
    To set up with Number Share, the companion smartphone must be activated on the same Verizon account as the Galaxy Watch3.
  • If you're replacing an existing Samsung smartwatch, refer to Replace Existing Device.
  • If you're pairing an existing Samsung smartwatch with a new phone, refer to Connect to New Phone.
  • Before completing the steps below, verify:
    • your companion Apple iPhone® has a cellular or Wi-Fi connection.
    • your eSim activation has been processed and you've received the QR code via email.
  1. Ensure the Galaxy Watch3 is is charged and powered on.
    If necessary, tap the watch display to begin.
  2. Install the Samsung Galaxy Watch (Gear S) app on the companion Apple iPhone.
  3. Open the
    Samsung Galaxy Watch (Gear S) app
    .
  4. If prompted with 'Galaxy Watch Would Like to Use Bluetooth ', tap
    OK
    .
    If necessary, tap
    Settings
    then tap the
    Bluetooth switch
    to turn on On switch icon.
  5. Tap
    START THE JOURNEY
    .
    Start the journey
  6. From the 'Pick your watch' screen, tap
    Galaxy Watch3
    .
    Tap Galaxy Watch3
  7. From the 'Watches spotted nearby' screen, tap
    Galaxy Watch3
    .
    Tap Galaxy Watch3
  8. From the bluetooth Pairing Request prompt, tap
    Pair
    on the Iphone and the
    Checkmark icon
    Checkmark icon on the Galaxy Watch3.
  9. Review the End User License Agreement and Privacy Policy, select (check) the desired options (e.g., Report diagnostic info, etc.) then tap
    Agree
    .
    Accept Agreement and Privacy Policy
  10. Tap 'Allow' or 'OK' to let Galaxy Watch send you notifications, access your calendar, or access your contacts.
  11. Tap
    SIGN IN
    to complete Samsung account setup.
    If you choose 'Skip', you can add a Samsung account after setup is complete.
  12. From the 'Set up a mobile plan' screen, tap
    Use code
    .
    If you choose 'Skip', you can add a cellular plan after setup is complete.
    Tap Use Code
  13. If prompted, tap
    OK
    to allow Galaxy Watch to access your camera.
  14. Point the iPhone's camera at the QR code below and scan it.
    The QR code will only work if the Galaxy Watch3 has been activated on a Verizon mobile number.
    Scan the provided QR code using your camera
  15. Tap
    Use plan
    .
    Tap Use plan
  16. Tap
    NEXT
    .
    Tap Next
  17. Tap
    Confirm
    .
    If presented, tap
    Allow
    for notification permissions.
  18. If presented, select the desired location permission option:
    • Only While Using the App
    • Always Allow
    • Don't Allow
  19. If presented, review the info then tap
    FINISH
    .
    Tap FINISH
Continue to use in conjunction with a companion smartphone for maximum functionality. To un-pair your companion smartphone and use the Galaxy Watch3 as a standalone device, reset the watch then set up as a standalone device.
Do not reset network settings during reset.
Standalone mode can't be used with Number Share.