Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-05-16 10:21:00.647

LTE Network Extender - Device Display and Status

Here's how to view the device display to determine the status of your LTE Network Extender.
  • Display shows status messages and device icons indicating the number of LTE devices connected to the Network Extender and the number of GPS satellites tracked.
  • If the Power/Status LED indicator is still blinking after one hour, relocate the GPS antenna to receive a stronger signal (see Additional Support ).
  • The screen goes blank if the Display button is not pressed for 30 seconds.
  • For information on LCD Display Messages and Error Codes, refer to the user guide.
  1. Reference the device display to determine Network Extender status.
    The Power/Status LED indicator solid blue while the unit is on and in-service.
    Device Display
  2. Press the button below the display to cycle through the following info:
    • Satellite and Device Connection
      Satellite and Device Connections
    • Device IP address and Network Extender MAC ID
      Display Network Extender Device IP Address and MAC ID screen
    • Timing Source and Device Name
      Display device serial number
  3. Refer to the device display chart for icon identification:
    Device Icons