Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Kazuna eTalk MYFLIX - Insert or Remove SD / Memory Card

2026-10-01 20:33:37.814

Kazuna eTalk MYFLIX - Insert or Remove SD / Memory Card

Here's how to insert or remove an SD / memory card for your eTalk MYFLIX.
The Kazuna eTalk MYFLIX™ supports microSD memory cards which can be purchased from any Verizon store or online.
  1. Ensure the device is powered off.
  2. From the notch (located on the bottom corner), gently lift then remove the battery cover.
    Battery cover removal
  3. From the notch in the lower edge of the battery compartment, lift then remove the battery.
    Remove the battery
  4. Do one of the following:
    • Insert SD / memory card
      With the gold contacts facing down, insert the SD / memory card.
      The image below is an example.
    • Remove SD / memory card
      If necessary, gently pull to remove the SD / memory card.
      The image below is an example.
  5. Insert the battery.
    Ensure the connectors on the battery align with the connectors on the device.
  6. Align the battery cover then gently press to snap cover into place.