Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Nokia 8 V 5G UW - Factory Data Reset (Powered Off)

2026-10-22 23:27:37.315

Nokia 8 V 5G UW - Factory Data Reset (Powered Off)

Here's how to factory / hard reset your Nokia 8 V 5G UW if the screen freezes or call, app, audio or sync issues occur and the device won't start up.
  • Perform a factory data reset only if necessary as it removes your Google™ account and all data including system data, app data and media.
  • For devices with Android™ Device Protection turned on, it's imperative Google sign-in credentials are known prior to completing a factory reset with the device powered off. If credentials are unknown, do one of the following:
  • If a pattern, PIN, etc. is or has ever been set up on the device, Google account sign-in is required during initial setup.
  1. Ensure the device is powered off.
    If the device is responsive and can be powered on, the preferred reset method should be performed.
  2. Connect a USB cable (charger or PC) and wait for the device to start charging.
    Device must be connected and charging to process next steps.
  3. When you see the charging indicator, simultaneously press and hold the
    Volume Down
     and
    Power buttons
     on the right edge of the device.
  4. Allow up to 30 seconds for the Bootloader screen to appear then release all buttons.
  5. Use the Volume buttons to cycle through the options and the Power button to select
    Recovery mode
    .
  6. When the 'No command' screen appears, press and hold the
    Power button
    then press the
    Volume Up button
    once.
  7. From the Android Recovery screen, select
    Wipe data / factory reset
    .
    Utilize the Volume buttons to cycle through the available options and the Power button to select.
  8. Select
    Factory data reset
    .
    Allow several minutes for the reboot process to complete.
  9. Select
    Reboot system now
    If applicable, set up your device.