Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Samsung Galaxy Tab S7+ 5G - Add / Remove Fingerprint Recognition

2026-10-02 00:22:44.692

Samsung Galaxy Tab S7+ 5G - Add / Remove Fingerprint Recognition

Here's how to set up and manage fingerprint recognition to unlock your Galaxy Tab S7+ 5G.
For the fingerprint scanner to operate, hands must be clean and moisture-free.
  2. From a Home screen, navigate:
    Settings Settings icon
    Security and privacy
    Biometrics
    .
  3. From the Biometrics section, tap
    Fingerprints
    .
  4. Enter the current PIN, password or pattern.
  5. Perform one of the following:
    • First Time Setup
      1. From the 'Fingerprints' screen, review the info then tap
        Continue
         (at the bottom).
      2. Follow the on-screen tutorial to scan your fingerprint and repeat as necessary until the process is complete.
      3. Tap
        Done
         (lower-right).
      4. Tap the
        Fingerprint unlock switch
         to turn on Switch on or off Switch off.
    • Add More Fingerprints
      1. Tap
        Add fingerprint
        .
        Up to 3 fingerprints can be registered on the device.
      2. Follow the on-screen tutorial to scan your fingerprint and repeat as necessary until the process is complete.
      3. Tap 'Done' if finished or 'Add' to continue adding fingerprints.
    • Remove Fingerprint(s)
      1. Touch and hold a fingerprint name until a blue checkmark appears to the left of the fingerprint.
        If desired, tap (check) additional fingerprints or tap All (upper-left) to remove all fingerprints.
      2. Tap
        Remove
         (at the bottom).
      3. To confirm, review the disclaimer then tap
        Remove
        .