Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

TCL FLIP Pro - Insert or Remove SD / Memory Card

2026-10-15 08:53:56.521

TCL FLIP Pro - Insert or Remove SD / Memory Card

Here's how to insert or remove an SD / memory card for your FLIP Pro.
The FLIP Pro supports microSD memory cards which can be purchased from any Verizon store or online.
  1. Ensure the device is powered off.
  2. Remove the battery cover.
    Insert your fingernail into the cutout located on the lower-right corner of the battery cover to lift and remove the cover.
  3. Use the fingertip cutout at the top of the battery compartment to lift the battery out.
  4. Do one of the following:
    • Insert SD / memory card
      In the top left of the battery compartment, slide the SD card into the card tray with the gold contacts facing down.
    • Remove SD / memory card
      Press down on the tab holding the SD card in place then slide the SD card out.
  5. Insert the battery.
    Ensure the gold contacts line up then press down gently to secure.
  6. Attach the battery cover.
    Press down along the edges to lock into place.