Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Airspeed Mobile Hotspot - Insert / Remove Battery

2026-10-17 17:16:11.125

Airspeed Mobile Hotspot - Insert / Remove Battery

Here's how to insert / remove the battery for your Airspeed Mobile Hotspot.
  1. Ensure your Airspeed Mobile Hotspot is powered off.
  2. Insert your fingers into the battery removal groove at the top edge of the battery cover, then lift and remove the battery cover. Set the cover aside.
  3. Do one of the following:
    • Insert battery
      Align the gold contacts on the battery with the gold contacts on the device and gently slide the battery into place.
    • Remove battery
      Insert your finger into the battery removal divot and lift the battery out of the battery compartment.
  4. Replace the battery cover by setting it on the device where the notches align, then press on the cover until it clicks into place and is flat across the entire bottom surface.
    Device diagram