Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

MOTO G POWER (2022) - Add / Remove a Wi-Fi Connection

2026-10-01 16:17:13.288

MOTO G POWER (2022) - Add / Remove a Wi-Fi Connection

Here's how to connect to a Wi-Fi network or remove a saved connection on your moto g power (2022).
  1. Open the
    Settings app
     Settings icon.
  2. Navigate:
    Network & internet
    Internet
    .
  3. Ensure the
    Wi-Fi switch
     is turned on On icon.
  4. Perform one of the following:
    • Connect to an Available Wi-Fi Network
      1. Tap the preferred network.
      2. Enter the appropriate password then tap
        Connect
        .
        To view the password as it is being entered, tap
        Show password
        .
    • Manually Connect to a Wi-Fi Network
      1. Tap
        Add network
         (scroll down if needed).
      2. From the Network SSID field, enter the appropriate network name.
      3. From the Security field, tap the
        Dropdown menu
         .
      4. Tap the applicable security option (e.g., None, WEP, WPA/WPA2-Personal, etc.).
      5. Enter the password into the Password field.
      6. Tap
        Advanced options
         then ensure all additional settings (e.g., Proxy, IP Settings, etc.) are configured appropriately then tap
        Save
        .
    • Remove a Wi-Fi Connection
      1. Tap
        Saved networks
        .
      2. Tap the applicable network then tap
        Forget
        .