Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

2025-05-16 13:43:49.455

TCL 30 LE - Insert / Remove Battery

Here's how to insert / remove the battery for your TCL 30 LE.
  1. Remove the battery cover.
    With the device facing down, use the provided slot (on the left edge, near the bottom) to lift then detach the cover.
    The image below is an example.
    Remove battery cover
  2. Do one of the following:
    The images below are examples.
    • Insert the battery.
      Ensure the gold connectors on the battery align with the connectors on the device.
      Insert battery
    • Remove the battery using the notch at the bottom.
      Remove battery
  3. Replace the battery cover, making sure to align it properly using the camera slot.
    Press down around the edges of the cover to lock it into place.
    Ensure the back cover is closed tightly to prevent water and dust from entering the device.
    The image below is an example.
    Replace battery cover