Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Inseego MiFi X PRO 5G UW - Wireless Network Security Settings

2026-10-02 07:04:27.654

Inseego MiFi X PRO 5G UW - Wireless Network Security Settings

Here's how to view / change security settings (e.g., password) for your Inseego MiFi X PRO 5G UW
To view or change network security settings (e.g., Wi-Fi password, number of connected devices) for your Inseego MiFi® X PRO 5G UW, see this info.
  2. From the Wi-Fi section, click the
    Navigation arrow
     Navigation arrow to open the Wi-Fi page.
  3. Click the '
    Primary Network
    ' or '
    Guest Network
    ' tab.
  4. Configure the following settings as desired:
    Depending upon the selected security type, available options may vary.
    • Network Name (SSID)
    • Security
      • None
      • WPA2 Personal PSK (AES)
      • WPA/WPA2 Mixed Mode
      • WPA3/WPA2 Transition
    • Password
      If the Wi-Fi Password is changed, the network settings on the computer must updated. For assistance, select the appropriate operating system:
  5. Select any of the following to turn on or off:
    On when a check mark is present.
    • Hide network name (SSID) on the touchscreen
    • Hide password on touchscreen
    • Broadcast primary network name (SSID)
      This setting isn't available for the Guest Network.
    • WPS
    • Wi-Fi Privacy Separation
  6. Click
    Save Changes
    .