Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

SHARP ROUVO V - Add / Remove Fingerprint Recognition

2026-10-13 15:46:41.815

SHARP ROUVO V - Add / Remove Fingerprint Recognition

Here's how to set up and manage fingerprint recognition to unlock your SHARP ROUVO V.
For the fingerprint scanner to operate, hands must be clean and moisture-free.
  2. From a Home screen, navigate:
    Settings Settings icon
    Security
    .
  3. Tap
    Fingerprint
    .
  4. Enter the current PIN, password or pattern.
  5. Perform one of the following:
    • First Time Setup
      1. Review the message then tap
        Next
        .
      2. Using on-screen prompts as a guide, lightly tap the
        Power button
         multiple times to scan your fingerprint.
      3. Tap DONE if finished or ADD ANOTHER to continue adding fingerprints.
    • Add More Fingerprints
      1. Tap
        Add fingerprint
        .
        Up to 5 fingerprints can be registered on the device.
      2. Using on-screen prompts as a guide, lightly tap the
        Power button
         multiple times to scan your fingerprint.
      3. Tap DONE if finished or ADD ANOTHER to continue adding fingerprints.
    • Remove Fingerprint(s)
      1. From the Fingerprints section, tap the
        Delete icon
         trashcan icon to the far right of the fingerprint you wish to remove.
      2. Tap
        DELETE
        If removing the last fingerprint, tap
        YES, REMOVE
        .