Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

Razer Edge 5G - Factory Data Reset (Powered Off)

2026-10-04 14:12:50.015

Razer Edge 5G - Factory Data Reset (Powered Off)

Here's how to factory / hard reset your Razer Edge 5G if the screen freezes or app, audio or sync issues occur and the device won’t start up.
  • Perform a factory data reset only if necessary as it removes your Google™ account and all data including system data, app data and media.
  • For devices with Android™ Device Protection turned on, it's imperative Google sign-in credentials are known prior to completing a factory reset with the device powered off. If credentials are unknown, do one of the following:
  • If a pattern, PIN, etc. is or has ever been set up on the device, Google account sign-in is required during initial setup.
  1. Ensure the device is powered off.
    To power off the device, simultaneously press then quickly release the
    Power and Volume up buttons
     on the top of the device so the 'Power off' prompt appears.
    If the device is responsive and can be powered on, the preferred reset method should be performed.
  2. Press and hold the
    Power
    ,
    Volume Up
     and
    Volume down buttons
    .
  3. When the Razer logo appears, release the
    Power
     and
    Volume down buttons
    .
  4. Continue to hold the
    Volume up button
     until the Android Recovery screen appears.
  5. From the Android Recovery screen, select
    Wipe data/factory reset
    .
    Use the Volume buttons to cycle through available options and the Power button to select.
  6. Select
    Factory data reset
    .
    Allow several seconds for the factory data reset to complete.
  7. Select
    Reboot system now
    .
    Allow several minutes for the reboot process to complete.
    If applicable, set up your device.