Here's how to set up and manage fingerprint recognition to unlock your Galaxy Tab S9 FE 5G.
For the fingerprint scanner to operate, hands must be clean and moisture-free.
- From a Home screen, navigate:.SettingsSecurity and privacyBiometrics
- From the Additional security settings section, tapBiometrics.
- TapFingerprints.
- Enter the current PIN, password or pattern.
- Perform one of the following:
- First Time Setup
- From the Fingerprints screen, review the info then tapContinue.
- Follow the on-screen prompts to scan your fingerprint and repeat as necessary until the process completes.
- TapDone(lower-right).
- Tap theFingerprint unlock switchto turn on
or off
.
- Add More Fingerprints
- TapAdd fingerprint.Up to 3 fingerprints can be registered on the device.
- Follow the on-screen prompts to scan your fingerprint and repeat as necessary until the process completes.
- Tap 'Done' if finished or 'Add' to continue adding fingerprints.
- Remove Fingerprint(s)
- Touch and hold a fingerprint name until a blue checkmark appears to the left of the fingerprint.If desired, tap (check) additional fingerprints or tap All (upper-left) to remove all prints.
- TapRemove(at the bottom).
- To confirm, review the info then tapRemove.