Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

TCL Devices
Download and Activate an eSIM

2026-10-15 03:35:05.511

TCL Devices
Download and Activate an eSIM

With an eSIM, your phone number and plan are installed digitally onto your TCL smartphone instead of using a physical SIM card. Downloading an eSIM profile is the first step in getting connected to the Verizon network.

Before you begin

Check that your device is eSIM (embedded SIM) capable, open the
Settings app
 then navigate:
System
About phone
Status
 to view IMEI (SIM slot 2).
Make sure you are using a Verizon-branded or unlocked device. Non-Verizon (BYOD) Prepaid devices don’t support eSIM activation.
Ensure your device is running the most current software and that you’re connected to the Verizon network or Wi-Fi.
If traveling abroad, activate your eSIM prior to your trip, as it requires the Verizon coverage to complete setup.

Steps

  1. Open the
    Settings app
    .
  2. Navigate:
    Network & internet
    Add SIM
    .
  3. Tap
    Download a new eSIM
    .
  4. Do one of the following:
    • If an eSIM profile is found:
      1. Tap
        Download
        .
      2. Tap
        Close
        .
    • If no eSIM profile is found:
      1. When Confirm your network displays, tap the appropriate network name that appears or tap
        Use a different network
        .
        If prompted to contact the network carrier, tap
        Done
         and start over on step 2.
      2. If prompted for a QR code, scan the image below using your device's camera.
        QR code
      3. If prompted, tap
        Download
        .
      4. After the profile has been added, tap
        Close
        .
  5. When the Phone activation message appears, tap
    OK
    .
Remove eSIM Profile
Enable / Disable eSIM Profile