Session Status

Due to inactivity, your session will end in approximately 2 minutes. Extend your session by clicking OK below.

Due to inactivity, your session has expired. Please sign in again to continue.

TCL K33 5G
Factory Data Reset (Powered Off)

2026-10-15 07:52:37.795

TCL K33 5G
Factory Data Reset (Powered Off)

Reset your TCL K33 5G to factory settings as a final troubleshooting step. Use this method if your device is unresponsive or you can't access the Settings menu.

Before you begin

If the device is responsive and can be powered on, the preferred reset method should be performed.
Perform a factory data reset only if necessary as it removes your Google™ account and all data including system data, app data and media.
For devices with Android™ Device Protection turned on, it's imperative Google sign-in credentials are known before completing a factory reset with the device powered off. If credentials are unknown, do one of the following:
If a pattern, PIN, etc. is or has ever been set up on the device, Google account sign-in is needed during initial setup.

Steps

  1. With the device powered off, press and hold the
    Volume down
     and
    Power
     buttons on the right edge of the device until the TCL logo appears then release only the power button.
  2. Continue to hold Volume down, until the Android Recovery screen appears.
  3. From the Android system recovery screen, highlight then select
    Wipe data/factory reset
     to continue with the reset.
    Use the Volume buttons to cycle through the available options and the Power button to select.
  4. To confirm, highlight then select
    Factory data reset
    .
  5. Once the reset is complete and the confirmation screen appears, select
    Reboot system now
     to restart your device.
Activate / Set Up Device